Skip to content

Serving all 50 states and Washington, D.C.

Water damage

Structural drying in Phoenix, AZ

Structural drying removes moisture that has soaked into walls, framing, subfloors and cabinets after the visible water is gone. It uses calculated airflow, dehumidification and daily meter readings so materials reach a documented dry standard before anything is closed up.

Analog hygrometer showing indoor relative humidity

Structural drying in Phoenix: local conditions

Partner coverage for water damage in Phoenix currently includes 50 ZIP codes: 85001, 85002, 85005, 85009, 85010, 85011, 85012, 85013, 85014, 85015, 85017, 85019, 85020, 85021, 85022, 85023, 85024, 85026, 85027, 85028, 85029, 85030, 85031, 85032, 85033, 85035, 85036, 85037, 85038, 85043, 85060, 85061, 85062, 85063, 85064, 85067, 85068, 85069, 85070, 85071, 85072, 85074, 85076, 85078, 85079, 85080, 85082, 85083, 85085, 85086. If your ZIP is on this list, a call connects you with a company that serves it.

Hard water and soil movement wear out copper pipes under slab foundations.

Slab-on-grade stucco homes dominate, many with flat or low-slope roofs and rooftop or attic AC units. Older homes in Encanto and Arcadia may have original galvanized or copper plumbing.

What you can expect

  • One call connects you with an independent restoration company that serves your ZIP code.
  • Fast call-back during business hours
  • Serving Phoenix, AZ
  • Photo and moisture documentation for insurance

Structural drying at a glance

Category
Water damage
Emergency service
Scheduled visit
Typical first step
Moisture mapping
Area
Phoenix, AZ

Other risks in Phoenix

Monsoon flooding and roof leaks

Intense storms flood streets and washes and overwhelm flat-roof drains and scuppers.

AC condensate leaks

AC units run for months, and clogged condensate lines overflow into ceilings.

Extreme heat and roofs

Summer temperatures above 110°F break down roof underlayment and coatings, so roofs that look fine leak during the first monsoon storm.

Hard water and water heaters

Phoenix's very hard water builds up scale in water heaters and fixtures, shortening their life and increasing leak risk.

Signs you need structural drying

  • Walls or baseboards still feel cool or damp days after a leak
  • Paint bubbling or peeling near the floor
  • Musty odor that returns after cleaning

How the work is done

Moisture mapping, then Open cavities if needed, then Airflow and dehumidification, then Document the dry standard. See the full structural drying process.

What affects the cost

Prices depend on the job, so restoration companies in Phoenix quote after an assessment. The main drivers are how much area is affected, how long it stayed wet, and what has to be removed or rebuilt. See the full list of structural drying cost factors.

Structural drying questions

Do I need a permit for repairs in Phoenix?

Structural, plumbing and electrical repairs need permits from the City of Phoenix Planning and Development Department.

How do I verify an Arizona contractor?

Search the Arizona Registrar of Contractors license lookup.

Why not just use fans?

Fans move air but don't remove moisture from it. Without dehumidification, the water evaporated from your walls stays in the room and soaks back into other materials.

Do walls always have to be cut open?

No. Many clean-water losses dry in place with small access holes. Walls are cut when water is contaminated, insulation is soaked, or readings won't come down.

Related pages

Other services in Phoenix

Structural drying in nearby cities

More about water and storm damage in Phoenix, or see structural drying nationwide.

Water, mold or fire damage? Get the right crew on it.

One call connects you with an independent restoration company that serves your ZIP code. Fast call-back during business hours.

Call now